Feb 9 2012
Accessoires
MOBY DICK TUB TATTOO designed by CLAASSEN & PARTNER
MOBY DICK TUB TATTOO - Adventures in the bathtub
TUB TATTOO is a sticker collection for the bathtub. You can stick Moby Dick and his hunters round the syphon, the fish can swim wherever you desire, even in the sink.
Application of your TUB TATTOO is pretty easy, but here are a few instructions:
Cleaning Procedures:
All surfaces are contaminated to some degree, especially the bathtub. To ensure good adhesion to any vehicle surface it is critical that you follow these recommended procedures in decontaminating and preparing the surface prior to TUB TATTOO installation.
1. Wash and rinse the area with liquid dish detergent and warm water. Then dry the surface with a clean, lint-free towel or cloth.
2. Finish up the cleaning process by wiping down the entire area with Alcohol (rubbing alcohol). To avoid recontamination during the final cleaning step, wipe the surface in just one direction, using a clean, lint-free towel or cloth. You are now ready to apply the TUB TATTOO.
Application Procedures:
You can choose to apply the TUB TATTOO in one of piece or what we recommend is to cut out the Moby Dick scene with a pair of scissors, that should go around the syphon of the bathtub, and apply the rest of the fish seperatly in the tub or any other surface you desire. For all these steps do leave the transfer foil(white) on the sticker. Then lay the TUB TATTOO on the dry surface, preferably from the circle(syphon) out, rubbing it well on the surface. You can also use a cloth or a squeegee to rub it on more, just make sure you press hard and remove all the airbubbles, before you carefully remove the backing. Once the TUB TATTOO touches the surface, there is no removal without damage. An extra set of hands is a good idea for the whoel procedure, and most importantly time and patience.
Application of your TUB TATTOO is pretty easy, but here are a few instructions:
Cleaning Procedures:
All surfaces are contaminated to some degree, especially the bathtub. To ensure good adhesion to any vehicle surface it is critical that you follow these recommended procedures in decontaminating and preparing the surface prior to TUB TATTOO installation.
1. Wash and rinse the area with liquid dish detergent and warm water. Then dry the surface with a clean, lint-free towel or cloth.
2. Finish up the cleaning process by wiping down the entire area with Alcohol (rubbing alcohol). To avoid recontamination during the final cleaning step, wipe the surface in just one direction, using a clean, lint-free towel or cloth. You are now ready to apply the TUB TATTOO.
Application Procedures:
You can choose to apply the TUB TATTOO in one of piece or what we recommend is to cut out the Moby Dick scene with a pair of scissors, that should go around the syphon of the bathtub, and apply the rest of the fish seperatly in the tub or any other surface you desire. For all these steps do leave the transfer foil(white) on the sticker. Then lay the TUB TATTOO on the dry surface, preferably from the circle(syphon) out, rubbing it well on the surface. You can also use a cloth or a squeegee to rub it on more, just make sure you press hard and remove all the airbubbles, before you carefully remove the backing. Once the TUB TATTOO touches the surface, there is no removal without damage. An extra set of hands is a good idea for the whoel procedure, and most importantly time and patience.
Additional Product Information
Material: sticky foil
Dimension (H/W/D): 270mm*297mm
Awards
short-listed for release 1.0
About the designer |
|---|
comments
register to comment